15 amp SLO BLO fuse for use with PL300, PL1250, PL2500 PowerLights and PL500 and PL1000 Solair PowerLights.

Tough, heat-resistant plastic diffusion screen. Clips on to PL7R reflector to provide a soft, even effect.

Two-leaf barndoors with easy-to-use filter holder. Mounts onto PL7R reflectors.

Ratchet Handle Replacement for PowerLights and StudioMax.

Converts 5/8" male to 3/8" male. (1-1/2" deep)

Scissor light lift. Expands from two feet to eight feet and holds up to 18 lbs. Ideal for Powerlights.

Complete light/stand kit for PowerLights.

Clip-on hinges with panels in photographic black powder coated finish. Rectangular sides and trapezoid top/bottom provide extreme flexibility for shaping light into your images.

Photographic black powder coated metal frame with spun diffusion glass for a softer light source, used with PL14R. Will eliminate approximately one f-stop.

For smaller spaces and portability, the same modified parabolic satin-anodized portrait reflector is ideal for feathering effects, and offers greater control for floodlighting large groups. 40º coverage.

Clamp-on hinges with panels in photographic black powder coated finish. Rectangular sides and trapezoid top/bottom provide extreme flexibility for shaping light into your images.

Photographic black powder coated metal frame with spun diffusion glass for a softer light source, used with PL16R. Will eliminate approximately one f-stop.

The portrait industry standard, this modified parabolic satin-anodized portrait reflector is ideal for feathering effects, and offers greater control for floodlighting large groups. 60º coverage.

Satin-anodized reflector with white interior and diffuser for soft illumination and controllable source lighting. 100º coverage.

4 piece clamp-on barn door set.

Satin-anodized reflector and diffuser for indirect flood, soft illumination and controllable source lighting. 100º coverage.

Satin-anodized reflector with white interior and diffuser for indirect flood, soft illumination and controllable source lighting. 100º coverage.

This half-moon reflector allows you to effectively controll and constrain your strobe lights to create a backlight, hairlight, or background light as needed.

Use this modified reflector on a Photogenic strobe located behind the subject to attain hair lighting effects and a background light. By using neutral density filters, the exposure for the background and hair can be controlled individually.

For the PL5R Reflector. Includes (PL5MF) mounting frame, PL5D Diffuser, 2” Aperture (PL5A2) and 3” Aperture (PL5A3).

Diffuser/Gel holder for PL5MF. Brushed aluminum frame with diffusion material that can be removed to use the frame as a gel holder.

Mounting frame ONLY for 5 inch background reflector. (reflector not included)

Convenient for illuminating and introducing background effects. Satin-anodized surface with 20º coverage.

Includes: 4 panel barn door (PL7BD) For use with: mounting frame (PL7MF) and standard high gain reflector (PL7R) not included.

Use with PL7R reflector. Includes: 4 panel barndoor (PL7BD), mounting frame (PL7MF), and diffuser (PL7D).

Photographic black powder coated metal frame with spun diffusion glass for a softer light source, used with PL7R. Will eliminate approximately one f-stop.

20º coarse honeycomb grid with metal frame. Used with PL7MF frame and PL7R reflector.

10º fine honeycomb grid with metal frame. Used with PL7MF frame and PL7R reflector.

Includes: mounting frame (PL7MF), diffuser (PL7D), coarse honeycomb grid with metal frame (PL7GC), and fine honeycomb grid with metal frame (PL7GF).

The mounting bracket for many of the 7” accessories and allows quick changes. Frame provides a light-baffling air flow which reduces heat from lamps.

The standard 71/2” pebbled highly reflective coating for most photographic applications. 35º coverage.

The counter weight accessory helps maintain a centered weight balance on your stand when using larger reflectors or soft boxes. Attaches to the underside of PowerLight bracket.

The flash tube protector covers and protects the flash tube when packing and transporting the lights. Fits on any Photogenic Quick-Change Mounting System.

The handle accessory makes it easy to adjust the focus of your PowerLight. Attaches to the underside light bracket.

15' AC Power cord for PowerLights, StudioMax, PhotoMaster and FlashMaster.

90 degree wall mount for monolight.

With only one strobe located behind the subject, you can attain a background light, hairlight, and a backlight, and, using neutral density filters, control the exposure for each reflection individually. This setup is especially effective for lower ceiling heights and location work.